1.Initial Inspection To determine or inspect the condition of the casings weather can be retread or not.	2.Buffing To remove all the remaining unwanted old tread from casing and prepare suitable surface which the new tread is to be bonded.
Minor Repair	Major Repair
3.Buzz Out To remove the small plies appear on the surface of buff tyre and remove small stones or nail trapped in the casing tyre or patch the tyre if the tyre have small hole.
4.Cementing To apply adhesion to the buff surface.	5. Building (Building Precured) The process that attach the liner or camelback to the buff casing.
5. Building (Building Hotcured)	6. Curing (Hotcured) The process that cured the rubber (cushion gum or camelback) at certain time, temperature and pressure.
6. Curing (Hotcured - EM)	6. Curing (Precured)
7. Final Inspection To inspect the tyre after curing process weather the tyre have any defect or not before sent to finished good storage.
<< Back